THIS IS TEST SITE

PLEASE VISIT EVOQUA.COM FOR OUR LIVE WEBSITE.

evoqua.com
Evoqua United States - Canada - EN

Evoqua Modulab Lab System HF W/out inlet pressure reg

Material: W2T196105 Unit of Measure #: EA See All Modulab Lab Systems

The MODULAB High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18. 2 M& omega; cm @ 25 C) with flow rates up to 14 lpm (3. 7 gpm) of pretreated water. 

List Price
${{finalPrice | intlNumber('en-EN','USD')}}
  • 0 is the minimum order quantity for this product. Please check quantity and add to cart again.
-
+

Offered in three configurations:

  1. Low TOC model
  2. Low bacteria model
  3. Low pyrogen model
Discontinued product
evoqa

The MODULAB High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18. 2 M& omega; cm @ 25 C) with flow rates up to 14 lpm (3. 7 gpm) of pretreated water. 

List Price
${{finalPrice | intlNumber('en-EN','USD')}}
-
+

Offered in three configurations:

  1. Low TOC model
  2. Low bacteria model
  3. Low pyrogen model
Discontinued product

Image Gallery

Description

The MODULAB High Flow system is a wall-mountable unit that requires a minimal footprint for installation. The MODULAB High Flow is delivered fully assembled and functionally tested. Cartridge will need to be purchased separately and should be installed after the system has been safely mounted. 

Product Information

Legacy Part Number

  • MHF0SMF5

Features and Benefits

  • High capacity, low TOC cartridges
  • Flow rates up to 14 lpm
  • Dual wavelength UV sterilization
  • Wall mountable
  • Up to 18.2 Megohm-cm water
  • Choice of cartridge to fit your application
  • Easy Sanitization

Specifications

  • Minimum Flow Rate: 2 lpm (0.5 gpm)
  • Maximum Flow Rate: 14 lpm (3.7 gpm)
  • Product Water Resistivity: Up to 18.2 Megω-cm @ 25 °C
  • Total Organic Carbon (TOC): < 15 ppb *
  • Heavy Metals: < 0.01 ppb
  • Bacteria: < 10 cfu/ml **
  • Endotoxin: < 0.05 EU/ml ***

* With Organic Removal Cartridge installed and RO (reverse osmosis) feed water.

** With Sub-micron filter installed as specified.

*** With UF (ultrafiltration) Filter Cartridge installed as specified.

Note: Specifications are based on a RO feed.

General Specifications

  • Minimum Feed Pressure: 25 psig
  • Maximum Feed Pressure: 60 psig
  • Minimum Feed Temperature: 41 °F (5 °C)
  • Maximum Feed Temperature: 86 °F (30 °C)

Physical Specifications

  • Length: 43" (109 cm)
  • Depth: 8.5" (22 cm)
  • Height: 39" (100 cm)*
  • UV Bulb Service Clearance: 6" (16 cm) Front

*Requires an additional 4" in height to allow changing of cartridges

Electrical Requirements

  • Low voltage service, single phase, 120VAC
  • 15 AMP breaker required by code

Feed Water Requirements

  • RO or DI feed water required

Documentation