PLEASE VISIT EVOQUA.COM FOR OUR LIVE WEBSITE.
The Ultra Clear® RO DI Series system delivers permeate water with a salt reduction of approximately 98 %.
The Ultra Clear® RO DI Series system delivers permeate water with a salt reduction of approximately 98 %.
The Ultra Clear® RO DI Series system will polish the RO permeate to a quality of < 0.1 µS/cm. At a 98 % rejection rate, the RO permeate water that originated from a 400 µS/cm feed water source would still have a conductivity of about 8 µS/cm.
The Ultra Clear RO DI Series System polishes this water to < 0.1 µS/cm. The deionization module is delivered with the Ultra Clear RO DI Series System. These modules are directional and will require replacing at a frequency dependent on feed water quality and water consumption. A changing interval of about 3 months is typical. The DI modules are a lower cost alternative to electro-deionization systems such as our Ultra Clear RO EDI Systems. However, a regular change of the modules are necessary.
An Ultra Clear RO system with DI module delivers water with a quality that fulfills the needs of most laboratory requirements. All systems display inlet and product water quality. The salt reduction rate will be shown in percentage.
Storage Tanks are available with 30, 60 and 80 liter. There are storage tanks up to 3.000 liter available as needed.
The Ultra Clear® TP Ultrapure Water Systems is one system with two choices how to use the water.
The successful Ultra Clear® RO EDI Series system combines leading edge technology and modern design.
The Ultra Clear® RO Series system produces high quality water with very low energy consumption.
